很多学员在项目中会遇到Nexus交换机，但是由于各种各样的原因，可能密码丢失，如何来破解Nexus交换机，这里跟大家分享一下！

Note  For Cisco Nexus 5000 Series switches that run Cisco NX-OS 4.0(0)N1(2a) or earlier releases, use Ctrl-B (Ctrl+Shift+B) instead of the Ctrl-].

________________________________________

...

Executing Mod 1 2 SEEPROM Test....done

   Mod 1 2 Post Completed Successfully

   Mod 3 Post Completed Successfully

POST is completed

 

Checking all filesystems....r. done.

Ctrl-] 

switch(boot)#

 

Step 8  Reset the network administrator password.

switch(boot)# configure terminal

switch(boot-config)# admin-password

WARNING! Remote Authentication for login through console has been

disabled

switch(boot-config)# exit

switch(boot)#

 

Step 9  Display the bootflash: contents to locate the Cisco NX-OS software image file.

switch(boot)# dir bootflash:

 

Step 10  Load the Cisco NX-OS system software image.

In the following example, the system image filename is nx-os.bin:

switch(boot) # load bootflash:nx-os.bin

 

Step 11  Log in to the device using the new administrator password.

switch login: admin

Password:

            很实用吧，在项目中如果遇到Nexus交换机，至少你不用担心会被密码锁住，苏州思朋用心做培训，努力为苏州所有的网络工程师创造一个技术的学习园地！

            本站内容不得转载，违者必究！本站关键词：苏州思朋，苏州CCNP，CCNP项目，Nexus交换机